Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
25. Install the battery cable junction block bolt to the power steering pump bracket.
Tighten
Tighten the bolts to 9 N.m (80 lb in).
26. Install the fan.
27. Install the fuel injection control module.
28. Fill the cooling system.
29. Install the air cleaner outlet duct.
30. Connect negative battery cable.
31. Install the intake manifold cover.
32. Prime the fuel system. Refer to Fuel System Priming.
33. Start the engine. If the engine stalls, repeat the above step.
34. Once the engine starts, inspect for fuel leaks.
