Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
2. Disconnect the return line from the return/junction block line.
3. Remove the fuel return line clips.
4. Remove the fuel injector return line from the injectors.
INSTALLATION PROCEDURE
1. Install the fuel injector return line to the injectors.
2. Install the fuel return line clips.
3. Connect the return line to the return/junction block line.
4. Install the glow plug controller.
5. Prime the fuel system. Refer to Fuel System Priming.
6. Start the engine. If the engine stalls, repeat the above step.
7. Once the engine starts, inspect for fuel leaks.
Fuel Injector Return Pipe Replacement - Right
FUEL INJECTOR RETURN PIPE REPLACEMENT - RIGHT
REMOVAL PROCEDURE
1. Remove the fuel injection control module (FICM).
2. Remove the fuel filter and bracket.
3. Disconnect the return line from the return/junction block line.
4. Remove the fuel return line clips.
5. Remove the fuel injector return line from the injectors.
INSTALLATION PROCEDURE