Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Negative: Service and Repair
Replacement procedure
BATTERY NEGATIVE CABLE REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the negative cable clip (1) from the power steering pump bracket.
3. Remove the negative cable from the positive cable clip.
4. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
5. Remove the negative battery cable bolt (1).