Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement (6.6L Diesel)
Removal Procedure
1. Place a drain pan under the vehicle.
2. Remove the power steering pulley. Refer to Power Steering Pulley Replacement.
3. Remove the bolt retaining the battery junction block from the power steering bracket.
4. Remove the bolts (1) from the rear of the pump.
5. Remove the bolts (2) from the front of the pump.
6. Remove the power steering pump mounting bracket retaining bolts to gain access to the power steering hoses.
