Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
7. Remove the power steering return hoses (2,4) from the power steering pump.
8. Remove the power steering pressure hose (2) from the power steering pump.
9. Remove the power steering pump from the vehicle.
10. Remove the rear bracket from the power steering pump.
Installation Procedure
1. Notice:
Refer to Fastener Notice in Service Precautions.
Install the rear bracket to the power steering pump.
^
Tighten the rear bracket retaining nuts to 50 Nm (37 ft. lbs.).
