Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Transmission Cooler: Service and Repair
Automatic Transmission - Allison
Automatic Transmission Oil Cooler Fitting Replacement
Automatic Transmission Oil Cooler Fitting Replacement
Removal Procedure
1. Disconnect the hose from the hydraulic connector assembly being replaced.
2. Remove the hydraulic connector assembly (1) and (2).
Installation Procedure
1. Notice:
Refer to Fastener Notice in Service Precautions.
Install a new hydraulic connector assembly (1) and (2).
^
Tighten to 25 Nm (18 ft. lbs.).
2. Connect the hose to the hydraulic connectors.
Transmission Fluid Auxiliary Cooler Replacement
Transmission Fluid Auxiliary Cooler Replacement
Removal Procedure