Silverado 2500 4WD V8-8.1L VIN G (2006)
Windshield Moulding / Trim: Removal and Replacement
Windshield Side Reveal Molding Replacement
Windshield Side Reveal Molding Replacement
Removal Procedure
1. Pull back the front door sealing weatherstrip (1) to expose the windshield reveal molding screws.
2. Remove the screws from the windshield reveal molding.
3. Remove the windshield reveal molding from the windshield pillar.
Installation Procedure
1. Install the windshield reveal molding to the windshield pillar.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws to the windshield reveal molding.
Tighten the screws to the windshield reveal molding to 2 N.m (18 lb in).
3. Install the front door sealing weatherstrip (1) to the pinch-weld.
