Silverado 2500 4WD V8-8.1L VIN G (2006)
Parking Brake Cable: Service and Repair
Replacement - Intermediate
w/Rear Disc
Park Brake Cable Replacement - Intermediate (w/Rear Disc)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
3. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer then
removing the cables from the equalizer bar.
4. For 25/35 series vehicles, disable the park brake cable automatic adjuster.
5. For 25/35 series vehicles, disconnect the intermediate cable from the rear park brake cable.
