Silverado 2500 4WD V8-8.1L VIN G (2006)
1. Install the cable.
2. Snap the retainer tabs into the body mount.
3. Connect the front cable to the intermediate cable.
4. Route the cable in through the floor pan and engage the grommet.
5. Remove the safety stands.
6. Lower the vehicle.
7. Roll the carpet into place.
8. Install the park brake pedal.
9. Adjust the park brake system.
w/Rear Disc
Park Brake Cable Replacement - Intermediate (w/Rear Disc)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
