Silverado 2500 4WD V8-8.1L VIN G (2006)
6. Install the park brake cable through the frame bracket and guides.
7. Install the right park brake cable (2) to the equalizer.
8. Lower the vehicle.
9. Adjust the park brakes. Refer to Park Brake Adjustment (w/Rear Disc) Park Brake Adjustment (w/Rear Drum).
w/Rear Disc
Park Brake Cable Replacement - Right Rear (Disc Brakes)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Release the park brake.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
5. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and
removing the right park brake cable from the equalizer bar.
