Silverado 2500 4WD V8-8.1L VIN G (2006)
16. Remove the oil pan bolts.
17. Important: The oil pan gasket is reusable if not cut or damaged.
Remove the oil pan and gasket.
Installation Procedure
Important: The oil pan must be installed within 5 minutes of the sealer being applied or the sealer will begin to cure, causing an inadequate seal.
1. Apply sealant GM 2346286 (Canadian P/N 10953472), or equivalent to the sides of the front (2) and rear (1) crankshaft bearing caps, on both the
left and right sides (4 locations total).
2. Install a NEW oil pan gasket into the oil pan groove, if required.
3. Install the oil pan.