Silverado 2500 4WD V8-8.1L VIN G (2006)
Tighten the bolt to 34 Nm (25 ft. lbs.).
4. Install the exhaust outlet heat shield.
5. Install the exhaust outlet heat shield bolts.
Tighten the bolts to 8 Nm (71 inch lbs.).
6. Install the turbocharger upper heat shield.
7. Install the turbocharger upper heat shield bolts.
Tighten the bolts to 9 Nm (80 inch lbs.).
8. Install the intake manifold cover.
9. Remove the hood hinge bolts (1) from the service position (2) and position the hood in the normal position.
Tighten the bolts to 25 Nm (18 ft. lbs.).
10. Raise the vehicle.
