Silverado 2500 4WD V8-8.1L VIN G (2006)
Oil Pressure Sensor: Service and Repair
Engine Oil Pressure Sensor and/or Switch Replacement
^
Tools Required
-
J 41712 Oil Pressure Sensor Socket
Removal Procedure
1. Remove the engine sight shield.
2. Disconnect the oil pressure sensor electrical connector (2).
3. Using J 41712 or equivalent, remove the oil pressure sensor.
Installation Procedure
1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the threads of the oil pressure sensor.
Notice: Refer to Fastener Notice in Service Precautions.
2. Using J 41712 or equivalent, install the oil pressure sensor.