Silverado 2500 4WD V8-8.1L VIN G (2006)
Alternator: Service and Repair
Generator Replacement
GENERATOR REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Disconnect the generator electrical connector (1).
3. Remove the generator cable from the generator, perform the following:
-
Slide the boot down revealing the terminal stud.
-
Remove the generator cable nut from the terminal.
-
Remove the generator cable.
4. Remove the drive belt.
5. Remove the generator bolts.
6. Remove the generator.
INSTALLATION PROCEDURE
1. Install the generator.