Silverado 2500 4WD V8-8.1L VIN G (2006)
8. Install the 10 remaining oil pan bolts (8).
^
Tighten the bolts to 27 Nm (20 ft. lbs.).
9. Install the drain plug (7) and drain plug seal (6).
^
Tighten the drain plug to 35 Nm (26 ft. lbs.).
Notice:
Refer to Component Fastener Tightening Notice in Service Precautions.
10. Lower the vehicle.
11. Refill the transmission with DEXRON(r)VI Automatic Transmission Fluid. Refer to Fluid Capacity Specifications.
Notice:
Use only clean and approved transmission fluid.
12. Check the transmission fluid level.
Important: Remember fluid remains in the external circuits and transmission cavities after draining the transmission.
