Silverado 2500 4WD V8-8.1L VIN G (2006)
Installation Procedure
1. Install the drain plug.
^
Tighten the drain plug to 33 Nm (24 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
2. Fill the differential carrier assembly with axle lubricant. Use the correct fluid. Refer to Capacities - Approximate Fluid and Sealers, Adhesives, and
Lubricants.
3. Install the fill plug.
^
Tighten the fill plug to 33 Nm (24 ft. lbs.).
4. Install the front differential carrier shield, if equipped.
5. Lower the vehicle.