Silverado 2500 4WD V8-8.1L VIN G (2006)
Constant Velocity Joint: Service and Repair
Wheel Drive Shaft Outer Joint and Seal Replacement
Wheel Drive Shaft Outer Joint and Seal Replacement
^
Tools Required
-
J 8059 Snap Ring Pliers
-
J 35910 Seal Clamp Tool
-
J 36652-1 Drive Axle Clamp Swage Tool
-
J 36652-2 Drive Axle Clamp Swage Tool
Disassembly Procedure
1. Use a hand grinder to cut through the swage ring (2).
Important: Use caution when using the hand grinder by the CV joint outer race (1).
2. Use side cutters to cut off the small boot clamp (4).