Silverado 2500 4WD V8-8.1L VIN G (2006)
3. Slide the boot (5) down the halfshaft bar (4) and away from the CV joint outer race (1).
4. Wipe all grease away from the face of the CV joint.
5. Find the halfshaft bar retaining snap ring (3), which is located in the inner race (2).
6. Spread the snap ring ears apart using J 8059 (or equivalent).
7. Pull the CV joint (1) and the CV joint boot (5) from the halfshaft bar (4).
8. Discard the old CV joint boot (5).
