Silverado 3500 2WD V8-6.0L (2007)
29. Unsecure the brake booster vacuum hose from the intake manifold, if removed.
30. Install the brake booster vacuum hose to the booster fitting, if removed.
31. Position the brake booster vacuum hose clamp at the booster, if removed.
32. Untie the engine harness branches from the cowl panel and position over the engine.
33. Connect the engine harness electrical connector (2) to the ECT sensor.
34. Position the engine harness clip (1) to the generator bracket and install the bolt (3).
Tighten the bolt to 9 N.m (80 lb in).