Silverado 3500 2WD V8-6.0L (2007)
Ensure that the fingers for the spring compressor are properly adjusted on the top of the front suspension mount. Position the shock absorber assembly
(3) in the J 45400 (2) so that the fingers are properly seated on the top of the front suspension strut mount (1).
Note the orientation of the upper spring seat, spring, and the shock before the they are to be removed. This will aid in the proper align during the
installation procedure.
Using the J 45400 (1), compressed the front spring (2).
Remove and discard the nut (3) from the shock (4). DO NOT reuse the nut, use NEW only.
Remove the front suspension shock absorber (2), and the front spring lower insulator (1).
