Silverado 3500 2WD V8-6.0L (2007)
9. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).
10. Install the inner bearing.
Important: The rubber outer sealing rings of the oil seal must be driven into the wheel hub first.
11. Install the new oil seal using the J 44420 (2) and the J 8092 (1).
12. Install the rotor, if necessary.
13. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.
Important: If the wheel hub assembly does not fully seat itself onto the axle shaft spindle and is removed, the wheel hub seal must be
replaced.
14. Install the wheel hub to the axle housing.
