chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Rear Axle Shaft Replacement (8.6 Inch Axle w/Drum Brakes NON-VSES)|Page 15052 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15046
Page 1
background image

Axle Shaft: Service and Repair
Rear Axle Shaft Replacement (8.6 Inch Axle w/Drum Brakes NON-VSES)

Rear Axle Shaft Replacement (8.6 Inch Axle w/Drum Brakes NON-VSES)

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the rear cover and gasket.
4. Remove the pinion shaft locking bolt.

5. On axles without a locking differential, remove the pinion shaft.

Rear Axle Shaft Replacement (8.6 Inch Axle w/Drum Brakes NON-VSES)|Page 15052 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15046