Silverado 3500 2WD V8-6.0L VIN U (2004)
1. Install the right engine mount to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts to the engine.
^
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
3. Install the engine mount-to-engine mount bracket bolts.
4. Lower the engine.
5. Remove the adjustable jack stands.
6. Install the engine mount heat shield, if equipped.
^
Tighten the engine mount-to-engine mount bracket bolts to 65 Nm (48 ft. lbs.).
7. Install the exhaust manifold.
8. Install the wheelhouse panel.
