Silverado 3500 2WD V8-6.0L VIN U (2004)
9. Position the engine wire harness.
10. Connect the following electrical connectors to the left side of the engine:
-
Main coil (2)
-
Fuel injectors
11. Install the harness clips to the fuel rail (1).
12. Install the CPA retainer.
13. Connect the following electrical connectors to the right side of the engine:
-
Main coil (4)
-
Fuel injectors (3)
14. Install the CPA retainer (5).
15. Install the harness clips to the fuel rail (1).
16. Connect the ETC electrical connector (2), preform the following:
16.1. Connect the connector.
16.2. Engage the gray retainer.
