Silverado 3500 2WD V8-6.0L VIN U (2004)
1. Install the fuel and EVAP bundle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. If vehicle is a crew cab or extended cab, install the fuel and EVAP bundle clip nuts.
Tighten
Tighten the nuts to 12 N.m (106 lb in).
3. If vehicle is a regular cab, install the fuel and EVAP bundle clip nuts.
Tighten
Tighten the nuts to 12 N.m (106 lb in).
4. Remove the caps from the fuel and EVAP lines at the fuel tank.
5. Connect the fuel and EVAP quick connect fittings.
6. If equipped with 4WD, install the torsion bar bracket.
