Silverado 3500 2WD V8-6.0L VIN U (2004)
1. Install the power steering pump (3) bracket to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the power steering pump bracket retaining bolts.
^
Tighten the power steering pump bracket retaining bolts to 25 Nm (18 ft. lbs.).
3. Install the power steering pump to the bracket.
4. Install the positive battery junction block bracket retaining bolts (2) to the power steering pump bracket.
^
Tighten the battery junction block retaining bolts to 9 Nm (80 inch lbs.).
