Silverado 3500 2WD V8-6.0L VIN U (2004)
7. Install the power steering pressure hose (2) to the power steering pump.
^
Tighten the fitting to 28 Nm (20 ft. lbs.).
8. Install the oil pan skid plate, if equipped.
9. Install the oil pan skid plate bolts.
^
Tighten the retaining bolts to 20 Nm (15 ft. lbs.).
10. Lower the vehicle.
11. Install the intermediate shaft. Refer to Intermediate Steering Shaft Replacement - Lower.
12. Install the power steering pulley. Refer to Power Steering Pulley Replacement.
13. Fill and bleed the power steering system. Refer to Bleeding the Power Steering System.
