chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Steering Pulley|Page 9096 > < Power Steering Pulley|Page 9094
Page 2
background image

5. Disconnect the upper electrical connector (3) from the power steering pump by pressing down on the rear of the locking tab and pulling the

connector outward.

6. Disconnect the lower electrical connector (4) from the power steering pump by moving the locking lever over center and pulling the connector

outward.

Power Steering Pulley|Page 9096 > < Power Steering Pulley|Page 9094