Silverado 3500 2WD V8-6.0L VIN U (2004)
Transmission Position Switch/Sensor: Service and Repair
Automatic Transmission - 4L60-E/4L65-E
Park/Neutral Position Switch Replacement
^
Tools Required
-
J 41364-A Park Neutral Switch Aligner
Removal Procedure
1. Apply the park brake.
2. Shift the transmission into neutral.
3. If equipped with 4-wheel drive (4WD), remove the front propeller shaft.
4. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
5. Disconnect the park/neutral position (PNP) switch electrical connector (2).
6. Remove the manual shaft lever nut.
