Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement
Removal Procedure
1. Remove the cylinder head.
2. Loosen the valve lifter guide retainer bolts.
3. Remove the valve lifter guide retainers.
4. Remove the valve lifter guides.
5. Remove the valve lifters.
6. If required, clean and inspect the lifters.
Installation Procedure
1. Apply clean engine oil to the roller and outside of the valve lifter.
2. Install the valve lifter.
3. Install the valve lifter guides.
4. Install the valve lifter guide retainer.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the valve lifter guide retainer bolt.
^
Tighten the bolt to 11 Nm (97 inch lbs.).
6. Install the cylinder head.
