Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
8. Disconnect the fuel feed and return lines from the fuel tank lines.
9. Remove the fuel bundle nuts from the chassis.
10. Loosen the electronic brake control module (EBCM) bracket bolts (4).
11. Allow the EBCM to remain loose in order to allow fuel pipe clearance.
12. Remove the fuel bundle using the following procedure:
1. Guide the fuel bundle pipes towards the rear of vehicle to clear the engine.
2. Lower the fuel bundle while moving it foreword and out.
INSTALLATION PROCEDURE
