Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
4. Connect the fuel hoses to the return/feed line as required.
5. Position the fuel hose clamps (1) at the return/feed line as required.
6. Install the air intake tube.
7. Install the water outlet.
8. Prime the fuel system. Refer to Fuel System Priming.
9. Start the engine. If the engine stalls, repeat the above step.
10. Once the engine starts, inspect for fuel leaks.
Fuel Return Junction Block Replacement
FUEL RETURN JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Reposition the fuel hose clamp at the return/junction block.
2. Remove the hose (1) from the return/junction block.
3. Disconnect the right fuel return line from the return/junction block line.