Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
Fuel Supply Line: Service and Repair
Fuel Hose Replacement - Fuel Filter/Heater Element Housing to Fuel Feed Block
FUEL HOSE REPLACEMENT - FUEL FILTER/HEATER ELEMENT HOUSING TO FUEL FEED BLOCK
REMOVAL PROCEDURE
1. Reposition the hose clamps at the fuel filter and the return line.
2. Remove the fuel hose (1) from the fuel filter housing and the return line.
INSTALLATION PROCEDURE
1. Install the fuel hose (1) to the fuel filter housing and return line.
2. Position the hose clamps at the fuel filter and the return line.
3. Prime the fuel system. Refer to Fuel System Priming.
4. Start the engine. If the engine stalls, repeat the above step.
5. Once the engine starts, inspect for fuel leaks.