Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
7. Install the oil level indicator tube bracket and bolts.
Tighten the bolts to 21 N.m (15 lb ft).
8. Install the oil level indicator tube bolt.
Tighten the bolt to 21 N.m (15 lb ft).
9. Connect the fuel feed line quick connect fitting.
10. Install the water outlet tube.
11. Prime the fuel system. Refer to Fuel System Priming.
12. Start the engine. If the engine stalls, repeat the above step.
13. Once the engine starts, inspect for fuel leaks.
Fuel Hose Replacement - Fuel Filter/Heater Element Housing to Fuel Feed Block
FUEL HOSE REPLACEMENT - FUEL FILTER/HEATER ELEMENT HOUSING TO FUEL FEED BLOCK
REMOVAL PROCEDURE
1. Reposition the hose clamps at the fuel filter and the return line.
2. Remove the fuel hose (1) from the fuel filter housing and the return line.
