Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
2. Use the J 45722 in order to install the fuel sender lock ring. Turn the fuel sender lock ring in a clockwise direction.
IMPORTANT:
-
Always replace the fuel sender seal when installing the fuel sender assembly. Replace the lock ring if necessary. DO NOT apply any type of
lubrication in the seal groove.
-
Ensure the lock ring is installed with the correct side facing upward. A correctly installed lock ring will only turn in a clockwise direction.
3. Connect the fuel lines to the sending unit.
4. Install the fuel tank.
