Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
1. Install the generator (2).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the generator bolts (1).
Tighten the bolts to 50 N.m (37 lb ft).
3. Install the positive battery cable to the generator, perform the following:
1. Install the positive cable.
2. Install the positive cable nut (2).
Tighten the nut to 9 N.m (80 lb in).
3. Slide the boot (3) up to cover the terminal stud.
4. Install the drive belt.
5. Connect the generator electrical connector (1).