Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
7. Connect the range selector cable end (2) to the transmission range selector lever ball stud (1).
8. Install the transmission support.
9. Install the transmission support side bracket and bolts.
10. Install the transmission support bolts and nuts.
^
Tighten the bolts/nuts to 95 Nm (70 ft. lbs.).
11. Install the transmission mount nuts.
^
Tighten the nuts to 40 Nm (30 ft. lbs.).
12. Remove the transmission jack.
13. Lower the vehicle.
14. Fill the transmission to the proper level with DEXRON(r) III transmission fluid.
Transmission Fluid Checking Procedure
Transmission Fluid Checking Procedure