Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
12. Remove the bolt (1) that retains the TCC PCS retaining bracket (2) to main valve body.
Important: The torque converter clutch (TCC) pressure control solenoid (PCS) retaining bracket (2) must not be modified. Note that the angle
between the 2 bracket surfaces is less than 90 degrees. Replace the bracket if the angle is 90 degrees or more.
13. Remove the TCC PCS retaining bracket (2).
14. Remove the TCC PCS (7), valve (4), and spring (3).
15. Remove the O-rings (5 and 6) from the TCC PCS (7).
16. Remove the shift solenoid 1 (SS1) retainer (1).
17. Remove the SS1.
18. Remove the O-rings (2 and 3) from SS1 (4).