Silverado 3500 2WD V8-6.6L DSL Turbo (2006)
1. Install the rear axle drain plug.
^
Tighten the rear axle drain plug to 33 Nm (24 ft. lbs.).
Notice: Refer to Fastener Notice.
2. Fill the rear axle. Use the proper fluid. Refer to Capacities - Approximate Fluid and Fluid and Lubricant Recommendations.
3. For the 9.5/9.5LD and the 10.5 inch axles, install the rear axle fill plug.
^
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
4. For the 11.5 inch axle, install the seal and the fill plug.
^
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
5. Lower the vehicle.
Lubricant Replacement - Rear Drive Axle (9.75 Inch Axle)
Lubricant Replacement - Rear Drive Axle (9.75 Inch Axle)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.