Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Amplifier: Service and Repair
AMPLIFIER REPLACEMENT
REMOVAL PROCEDURE
1. If equipped with a Bose. amplifier, remove the radio amp fuse located under the hood electrical center.
2. Remove the floor console bezel.
3. Remove the cupholder.
4. Remove the bolts (1) retaining the console to the instrument panel (I/P).
5. Remove the console storage bin.
6. Remove the center console end panel.
7. Disconnect the audio amplifier electrical connectors.
8. Remove the 4 screws retaining the upper console bracket to the lower console bracket.
The front 2 screws (1) are shown in the graphic.
