Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Speaker: Service and Repair
Speaker Replacement - Front
SPEAKER REPLACEMENT - FRONT (WINDSHIELD PILLAR SPEAKER)
REMOVAL PROCEDURE
1. Remove the windshield garnish molding (2).
2. Disconnect the electrical connector (3) to the speaker.
3. Remove the speaker (1) by press until it is out of the molding.
INSTALLATION PROCEDURE
1. Press in the speaker (1) until it is fully seated.
2. Connect the electrical connector (3).
3. Install the windshield garnish molding (2).