Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Hood Hinge: All Technical Service Bulletins
Body - Replacement Fender Hood Hinge Hole Too Large
INFORMATION
Bulletin No.: 08-08-63-003
Date: November 26, 2008
Subject:
Hood Hinge Pivot Hole Too Large On Some Replacement Fenders
Models:
1999-2007 Chevrolet Silverado Classic
2001-2006 Chevrolet Avalanche, Suburban, Tahoe
1999-2007 GMC Sierra Classic
2001-2006 GMC Yukon Models
Technicians installing GMSPO service replacement fenders may find that the fender side hood hinge pivot bolt attachment hole is too large (12 mm).
The hood hinge pivot bolt attachment hole on some service fenders may be too large (12 mm), causing improper retention of the pivot bolt. To correct
this condition, add a M8 X 32 mm O.D. X 2 mm thick washer between the hinge halves on the inboard side of the fender side hood hinge. This will
provide the proper surface for the shoulder of the pivot bolt to contact as it is tightened. Refer to the illustration above.
Parts Information
Disclaimer
