Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
9. Remove the quarter trim panel.
10. Remove the lower bolt from the instrument panel (I/P) support post.
11. Remove the carpet from the vehicle.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material
size as the original installation. Always return the carpet to the original location.
1. Install the carpet to the vehicle.
2. Install the lower bolt to the I/P support post.
3. Install the rear quarter trim panel.
4. Install the jack assembly.
5. Install the rear seat if removed.
6. Install the shift lever and the boot, if equipped.
7. Install the center seat, if equipped.
8. Install the floor storage console.
9. Install the front seats.
10. Install the door sill plates.
11. Install the hinge pillar trim panel.
