Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Head Rest: Procedures
Head Restraint Retainer Replacement - Front Seat
HEAD RESTRAINT RETAINER REPLACEMENT - FRONT SEAT
REMOVAL PROCEDURE
1. Slide up the seat back trim cover in order to gain access to the rear cardboard panel fasteners. Refer to Seat Back Cover and Pad Replacement -
Front.
2. Remove the panel fasteners. Pull back the panel in order to gain access to the bushings.
3. Remove the head restraint retainers from the seat back frame by squeezing the retaining tabs together at the base of the guide(s) and lifting up.
INSTALLATION PROCEDURE
