Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Tailgate Release Handle: Service and Repair
Handle Rod Retainer Replacement - Endgate
Handle Rod Retainer Replacement - Endgate
Removal Procedure
1. Open the endgate.
2. Remove the fasteners (1) retaining the endgate handle bezel.
3. Remove the endgate handle bezel
4. Release the endgate latch rod from the handle rod retainer.
5. Release the retaining clip (2) and remove the handle rod retainer from the handle.
Installation Procedure
1. Install the handle rod retainer to the handle, ensuring the retaining clip (2) is fully seated.
2. Attach the endgate latch rod to the handle rod retainer.
