Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
4. Remove the disc brake pads from the disc brake caliper mounting bracket.
5. Remove the disc brake pad retainers from the disc brake caliper mounting bracket.
6. Inspect the disc brake hardware. Refer to Disc Brake Mounting and Hardware Inspection - Front.
7. Remove the caliper pin boots (4) from the disc brake caliper mounting bracket (3).
Installation Procedure
1. Lubricate the front brake caliper bushings, bolts and seals with high temperature silicone brake lubricant.
2. Install the caliper pin boots (4) to the disc brake caliper mounting bracket (3).
3. Install the disc brake pad retainers to the disc brake caliper mounting bracket.