Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
15. Remove the brake caliper mounting bracket bolts.
16. Caution:
Do not depress the brake pedal with the brake rotors/calipers and/or the brake drums removed. Damage to the brake system may result. If brake
system damage occurs and is not repaired, vehicle damage and/or personal injury or death may result.
Remove the brake caliper and the brake caliper mounting bracket as an assembly.
17. Remove the brake caliper mounting bolts.
18. Remove the brake caliper from the brake caliper mounting bracket.
19. Inspect the caliper assembly. Refer to Brake Caliper Inspection.
20. Remove the brake pads from the brake caliper mounting bracket.
21. Remove the anti-rattle clips from the brake caliper mounting bracket.
22. Inspect the brake caliper mounting bracket for cracks and/or damage. Replace if necessary.
23. Inspect the brake caliper mounting bracket bushings for damage and/or wear. Replace the bushings if necessary.
24. Perform the following procedure to replace the brake caliper mounting bracket bushings.
^
Insert a flat bladed tool between the bushing flange and the mounting bracket.
^
Work the tool around the bushing flange and remove the bushing from the mounting bracket.
^
Place a socket over the boot onto the bushing flange and install the bushing to the mounting bracket.
Installation Procedure
