Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
6. Remove the bolt from the rear axle clip.
7. Remove the cable from the differential clip.
8. Remove the cable from the mounting bracket by depressing the locking tabs.
9. Perform the following procedure to remove the cable (2) from the backing plate (4):
1. Compress the spring (3) by pushing towards the lever (1).
2. Depress the locking tabs.
3. Pull the cable housing out of the backing plate (4).
4. Remove the cable (2) through the slot in the backing plate.
10. Remove the park brake cable (2) from the lever (1).
11. Remove the cable from the vehicle.
Installation Procedure
1. Install the cable to the vehicle.
