Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
After installing the cable to the rear axle holding clip, verify that clip is securely retaining the cable. If not, crimp the clip by hand taking care not
to pinch or kink the cable.
Install the cable to the differential clip.
7. For 25/35 series vehicles, connect the cable at the equalizer.
8. For 25/35 series vehicles, enable the park brake cable automatic adjuster. Refer to Enabling the Park Brake Cable Automatic Adjuster.
9. For all 15 series vehicles, pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
10. Remove the safety stands.
11. Remove the safety stands and lower the vehicle.
12. Adjust the park brake cable.
(W/NYS)
Park Brake Cable Replacement - Right Rear (w/NYS)
Removal Procedure
1. Release the park brake.
