Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
9. Remove the safety stands.
10. Lower the vehicle.
Park Brake Cable Replacement - Intermediate
Park Brake Cable Replacement - Intermediate
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer Vehicle Lifting
3. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer then
removing the cables from the equalizer bar.
4. For 25/35 series vehicles, disable the park brake cable automatic adjuster. Refer to Disabling the Park Brake Cable Automatic Adjuster.
5. For 25/35 series vehicles, disconnect the intermediate cable from the rear park brake cable.
